JET 321112 BDB 1340A BENCH LATHE W/ COLLET & TAPERBDB-1340A

JET Bench Lathe, Belt Drive, Series: BDB-1340A, 13 in Swing Over Bed, 7-25/32 in Swing Over Cross Slide, 40 in Distance Between Centers, 7-3/8 in Bed Width, #3 Morse Taper Tailstock Taper, #5 Morse Taper (#3 Morse Taper) Spindle, 60 to 1240 rpm Spindle Speed, 12 Spindle Speed, 6-5/16 in Cross Travel, 3-3/4 in Tailstock Spindle Travel, 35 in Carriage Travel, 2-11/16 in Compound Travel, 0.0006 to 0.013 in Maximum Cross Feed Rate per Revolution, 0.0018 to 0.0374 in Maximum Longitudinal Feed Rate per Revolution, 2 hp, 230 VAC, 71 x 32 x 45 in

Features:

• Comes with an enclosed gearbox as a standard feature
• Enclosed gear box design provides smooth, quiet operation
• Fast, easy speed changes
• Low voltage motor controls
• Helical cut headstock gears reduce noise
• Change gears allow metric threading
• Spindle is supported by precision tapered roller bearings
• V-way bed is induction hardened and ground
• Gap bed section provided for large diameter work
• Independent leadscrew and feed rod
• T-slotted compound slide featuring four-way tool post
• Carriage mounted spindle control lever
• Automatic feeding and threading are fully interlocked
• Feed selectors travel in grooved ways
• Tailstock may be offset for turning tapers and includes an inch metric graduated quill
• 6 in 3-jaw direct mount scroll chuck with top reversing jaws, 8 in 4-jaw independent chuck and 12 in faceplate
• Four-way tool post, steady and follow rest, metric change gear, centers and headstock center sleeves and threading dial
• 38 longitudinal/cross feed rates
• 23 metric threads
• 5/8 in x 5/8 in max tool size, 18-3/4 in swing through gap, 13 in swing over bed, 0.45 - 10 metric threads, 2-5/8 in steady rest capacity, 38 number of inch threads, D1-4 spindle mount, 2-3/4 in follow rest capacity, 1-3/8 in spindle bore, 3-1/2 - 80 TPI, 13 in x 40 in size, 8 in length, 230 V prewired

Specifications:

• Bed Width: 7-3/8 in
• Carriage Travel: 35 in
• Compound Travel: 2-11/16 in
• Cross Travel: 6-5/16 in
• Dimensions: 71 x 32 x 45 in
• Distance Between Centers: 40 in
• Horsepower: 2 hp
• Maximum Cross Feed Rate per Revolution: 0.0006 to 0.013 in
• Maximum Longitudinal Feed Rate per Revolution: 0.0018 to 0.0374 in
• Number of Spindle Speeds: 12
• Series: BDB-1340A
• Spindle Size: #5 Morse Taper (#3 Morse Taper)
• Spindle Speed: 60 to 1240 rpm
• Swing Over Bed: 13 in
• Swing Over Cross Slide: 7-25/32 in
• Tailstock Spindle Travel: 3-3/4 in
• Tailstock Taper Size: #3 Morse Taper
• Type: Belt Drive
• Voltage Rating: 230 VAC

Additional Information:

• This product is drop-shipped directly from the manufacturer.